How to Root Galaxy Note 10.1 N8010 Official XXUCMA8 Android 4.1.2 Jelly Bean Firmware

Now you can easily Root your Galaxy Note 10.1 N8010  to Official Jelly Bean Firmware XXUCMA8 Android 4.1.2 .If you have not already updated your Galaxy Note 10.1 N8010 to XXUCMA8 Android 4.1.2 Jelly Bean Official firmware, you can do so using our guide.

We suggest installing this new Jelly Bean update from Samsung KIES, however you should use our handbook tutorial as well. You can now root XXUCMA8 Android 4.1.2 on Galaxy Note 10.1 N8010 by following the step-by-step tutorial below. Why do you have to root? Read: Benefits of rooting an Android device.


Pre-Requisite:

• This process requires at least 70% battery life to accomplish it.


• You must take the backup of the following data such as SMS, Call Logs, Contacts, Images, Music, Videos, Bookmarks, APN (Access Point Names) settings and MMS (Multimedia Messaging Service) settings etc. After creating backup of your data you can also restore them.


• You should disable the security suites such as antivirus or firewall whatever installed on your Computer and in Galaxy Note 10.1.As these may cause interruption during the process due to security issue on your system/device.


• Navigate yourself to the place / option where you can Enable the USB Debugging on your Galaxy Y device through this path – “Settings > Applications > Development > USB debugging”. Remember to check the USB Debugging option at the end.


• Also tick mark and enable Settings->Security-> Unknown sources

Disclaimer: Follow this guide at your own risk.Next of web Media will not be liable if your device or data gets damaged in any way during the process

How to Root  Galaxy Note 10.1 N8010 Official  XXUCMA8 Android 4.1.2 Jelly Bean Firmware

Step 1 - Download Root Package – CF-Auto-Root for Samsung Galaxy Note 10.1 to your computer and extract the zip file.

Step 2 - Download ODIN v1. 85 which will help you to root Android 4.1.2 on Samsung Galaxy Note 10.1 N8010.

Step 3 - Turn OFF your tablet. After that go to Download Mode. You can do it by Pressing and holding the Volume Up button and Power button together till the construction Android robot and a triangle appears on your screen. Press Power again to confirm.

Step 4 - Samsung Galaxy Note 10.1 USB drivers should be installed on your computer.

Step 5 - Open ODIN. Attach your tablet to your computer although your tablet is in the Download Mode.

Step 6 - If your tablet is connected properly, one of the ID: COM boxes will turn yellow with the COM port number. This step will take some time.



Step 7 - In this step you have to select the file that you have to flash on your tablet. This file will be found from the extracted file in Step 1.

• Click on ‘PDA’ and choose ‘CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010. zip‘.

Step 8 - In ODIN, select the Auto Reboot and F. Reset Time options, if not already selected.

Step 9 - Now click on the Start button in ODIN. The process will set up and would require a couple of minutes to complete.

Step 10 - After the installation is done, the tablet will restart into Recovery Mode automatically and install the root files. Your ID: COM box will also turn green in this step.

Step 11 - Unplug your tablet, when you see the home screen.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.

OPTIONAL: Still not rooted? Once again carry out the complete tutorial, but check in ODIN, the “Auto Reboot” option is NOT selected. Then after installation (Step 10), do the following:

Step 11 - Take the battery out to turn OFF the tablet forcefully.

Step 12 - Turn ON your tablet with Volume Down + Power buttons to go into Recovery Mode manually. This will initiate the install process of rooting your phone.

Your Samsung Galaxy Note 10.1 is rooted on XXUCMA8 Android 4.1.2 Jelly Bean official software update.