How to Install CWM Recovery on Samsung Galaxy Tab 7.7 [tutorial]
http://crazywebtalks.blogspot.com/2014/01/how-to-install-cwm-recovery-on-samsung.html
Now Samsung Galaxy Tab 7.7 user can Install CWM 6 their tablet .in this article we will provide you method to Install CWM Recovery on your Galaxy Tab 7.7 device.
There are many custom ROMs available for Galaxy Tab 7.7 but to flash them you must first install CWM on your tablet. Samsung Galaxy Tab 7.7 users can now install ClockworkMod Recovery on their devices using the tutorial below.
Disclaimer: Developers and Nextofweb cannot be held responsible in case of any damage happened to your device. Flashing your device is considered risky hence you are advised to read the tutorial completely before moving on to recovery and flashing. Execute these steps on your own risk.
Pre-requisites
1. Install USB Driver for Samsung Galaxy Tab 7.7 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 per cent.
File Required
Odin 3.07
Download CWM Recovery 6 for Galaxy Tab P6800
Download CWM Recovery 6.04.5 for Galaxy Tab P6810
Download CWM Recovery 6.0.4.5 for Galaxy Tab I815
How to Install CWM 6 on Samsung Galaxy Tab:
Step 1. Open Odin3.exe.
Step 2 .Put your phone in download mode
Step 3. Connect your phone to your PC.
Step 4. The ID:COM box in Odin should turn blue now, that means your phone is connected properly in download mode.
Step 5. Click the PDA tab in Odin and select the downloaded Recovery.tar file and let it load. Your Odin should look exactly as shown below, make sure that no extra options are selected.
Step 6. Hit start now and sit back, it will take a few seconds to flash the recovery and your device will reboot.
Step 7. Press and hold Volume Up + Home Button + Power Key to access the CWM Recovery that you just installed.
That’s All. You’re done with successfully installing Clockworkmod recovery on Samsung Galaxy Tab 7.7. All set to flash custom ROMs on your Galaxy Tab 7.7!
There are many custom ROMs available for Galaxy Tab 7.7 but to flash them you must first install CWM on your tablet. Samsung Galaxy Tab 7.7 users can now install ClockworkMod Recovery on their devices using the tutorial below.
Disclaimer: Developers and Nextofweb cannot be held responsible in case of any damage happened to your device. Flashing your device is considered risky hence you are advised to read the tutorial completely before moving on to recovery and flashing. Execute these steps on your own risk.
Pre-requisites
1. Install USB Driver for Samsung Galaxy Tab 7.7 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 per cent.
File Required
Odin 3.07
Download CWM Recovery 6 for Galaxy Tab P6800
Download CWM Recovery 6.04.5 for Galaxy Tab P6810
Download CWM Recovery 6.0.4.5 for Galaxy Tab I815
How to Install CWM 6 on Samsung Galaxy Tab:
Step 1. Open Odin3.exe.
Step 2 .Put your phone in download mode
Step 3. Connect your phone to your PC.
Step 4. The ID:COM box in Odin should turn blue now, that means your phone is connected properly in download mode.
Step 5. Click the PDA tab in Odin and select the downloaded Recovery.tar file and let it load. Your Odin should look exactly as shown below, make sure that no extra options are selected.
Step 6. Hit start now and sit back, it will take a few seconds to flash the recovery and your device will reboot.
Step 7. Press and hold Volume Up + Home Button + Power Key to access the CWM Recovery that you just installed.
That’s All. You’re done with successfully installing Clockworkmod recovery on Samsung Galaxy Tab 7.7. All set to flash custom ROMs on your Galaxy Tab 7.7!
